7 ton articulated crane
7 ton articulated crane
7 ton articulated crane:
This product is classified as a truck crane.
And has the ability to install hydraulic crane winch and install carrying basket and sliding pockets.
The load capacity of this type of crane behind the truck is 7000 kg at a distance of three meters from the crane.
Depending on the length of the drawers and the opening of the telescope, the loading capacity decreases at longer distances, according to the load table.
7 ton articulated crane:
This crane has been highly welcomed by users due to its many functions and has increased its special customers.
This crane is in the category of truck cranes and is produced in different tonnages in Saliar company with the highest quality and the best material.
The accessibility of this device is very high, also this crane has the ability to install winch, basket and pocket.
If you are planning to buy this device, be sure to contact our experts.
What is a Joint Crane?
7 ton articulated cranes are classified as truck cranes.
And has the ability to install crane hydraulic winch.
The load capacity of this type of crane behind the truck is 7000 kg at a distance of three meters from the crane.
Based on distance, the loading capacity decreases at longer distances, according to the load table.
Care must be taken not to lift a load heavier than the load table in the form of a horizontal rig at a great distance from the center of the crane.
Because it can cause unsafe conditions in crane loading and be dangerous.
The distinctive feature of this type of truck crane is the light weight of the crane.
Which has made it possible to install on cars with 13-ton chassis.
The weight of this crane is about 2400 kg.
Which is very suitable for installation on trucks and vans.
Saliar Sanat Pars Instagram page
| مشخصات فنی | Technical Specifications | |
|---|---|---|
| مدل | STC10000 | Type |
| حداکثر گشتاور مجاز | 10000 (kg.m) | Max. Rated Torque |
| ظرفیت بار برداری مجاز در شعاع 3 متری | 3000 (kg) | Lifting Capacity at radius of 3m |
| حداکثر زاویه گردش | 400 (°) | Max. Slewing arc |
| گسترش ثابت کننده های جلو | 150 (cm) | Front Outriggers Extension |
| گسترش ثابت کننده های عقب | 130 (cm) | Rear Outriggers Extension |
| ظرفیت باک روغن | 80 (l) | Oil tank capacity |
| کمینه وزن | 1200 (kg) | Min. Weight |
| حداقل شاسی مورد نیاز | 6 (Ton) | Min. required chasiss |
| نیروی محرکه | P.T.O خودروی حامل Vehicle P.T.O |
Driving force |
| قابلیت نصب وینچ هیدرولیک | دارد | Capability of mounting hydraulic winch |
| قابلیت نصب سبد | دارد | Capability of mounting basket |
| قابلیت کنترل از راه دور | دارد | Capability of remote control |
| قابلیت نصب سیستم هوشمند کنترل پایداری | دارد | Capability of mounting LMI |
| تعداد قطعات بوم | 2 | 3 | 4 |
|---|---|---|---|
| حداکثر شعاع دستیابی Max outreach radius |
8.5 متر | 12 متر | 15 متر |
| حداکثر ارتفاع دستیابی Max outrech hieght |
11 متر | 14.5 متر | 17.5 متر |
Contact us through the following numbers to know the order conditions and product information.
Other Saliar cranes
7 ton articulated crane
7 ton articulated crane 7 ton articulated crane: This product
10 ton articulated crane
3 ton articulated crane 10 ton articulated crane: This product
15 ton articulated crane
15 ton articulated crane 15 ton articulated crane: This product
